2009 Dodge Ram 1500 Pickup Owner Manual - Page 334

332 STARTING AND OPERATING selected position indicator light will flash and the origi- 3. While still rolling, rotate the transfer case control nal position indicator light will remain ON. At this time, switch to the desired position. reduce speed and stop spinning the wheels to complete 4. After the desired position indicator light is ON (not the shift. flashing), shift the transmission back into gear. 2WD or 4WD LOCK⇔ 4WD LOW Alternate Procedure NOTE: When shifting into or out of 4WD LOW some 1. Bring the vehicle to a complete stop. gear noise may be heard. This noise is normal and is not detrimental to the vehicle or occupants. 2. With the key ON and the engine either OFF or running, shift the transmission into NEUTRAL. Shifting can be performed with the vehicle rolling 2 to 3 mph (3 to 5 km/h) or completely stopped. You can use 3. Rotate the transfer case control switch to the desired either of the following procedures: position. Preferred Procedure 1. With the engine running, slow the vehicle to 2 to 3 mph (3 to 5 km/h). 2. Shift the transmission into NEUTRAL. 4. After the desired position indicator light is ON (not flashing), shift the transmission back into gear.