2009 Dodge Ram 1500 Pickup Owner Manual - Page 337

STARTING AND OPERATING 335 Transfer Case Position Indicator Lights The Transfer Case Position Indicator Lights (4WD, 4LOW, and 4WD AUTO) are located on the instrument cluster and indicate the current and desired transfer case selection. When you select a different transfer case position, the position indicator lights will do the following: 2. The newly selected position indicator light will continue to flash. 3. The transfer case will not shift. NOTE: Before retrying a selection, make certain that all the necessary requirements for selecting a new transfer case position have been met. To retry the selection, turn If all shift conditions are met: the control knob back to the current position, wait five 1. The current position indicator light will turn OFF. seconds, and retry selection. To find the shift requirements, refer to the ЉShifting ProcedureЉ for your transfer 2. The selected position indicator light will flash until the case, located in this section of the owner's manual. transfer case completes the shift. The "SVC 4WD Warning Light" monitors the electronic 3. When the shift is complete, the indicator light for the shift four-wheel drive system. If this light remains on selected position will stop flashing and remain ON. after engine start up or illuminates during driving, it If one or more shift conditions are not met: means that the four-wheel drive system is not functioning properly and that service is required. 1. The indicator light for the current position will remain ON. 5