2009 Dodge Ram 1500 Pickup Owner Manual - Page 23
2009 Dodge Ram 1500 Pickup Manual
Page 23 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 Remote Key Unlock, Driver Door/All Doors First This feature lets you program the system to unlock either the driver's door or all doors on the first press of the UNLOCK button on the RKE transmitter. To change the current setting, proceed as follows: 2. Release both buttons at the same time. 3. Test the feature while outside of the vehicle by pressing the LOCK/UNLOCK buttons on the RKE transmitter with the ignition switch in the OFF position and the key removed. 2 • For vehicles equipped with the EVIC, refer to "RKE 4. Repeat these steps if you want to return this feature to Unlock Sequence" under "Customer-Programmable its previous setting. Features (SETUP)" in the "Electronic Vehicle InformaNOTE: Pressing the LOCK button on the RKE transmittion Center (EVIC)," in Section 4 of this manual. ter while you are inside the vehicle will activate the • For vehicles not equipped with the EVIC, perform the Vehicle Security Alarm System. Opening a door with the following procedure: Vehicle Security Alarm System activated will cause the 1. Press and hold the LOCK button on a programmed alarm to sound. Press the UNLOCK button to deactivate RKE transmitter for at least four seconds, but no longer the Vehicle Security Alarm System. than ten seconds. Then, press and hold the UNLOCK button while still holding the LOCK button.