2007 Ford Escape Owner Guide 1st Printing (Spanish) - Page 382

Driver Controls 3. Press the SET ACC control and release it. 4. Take your foot off the accelerator pedal. light on the 5. The indicator instrument cluster will turn on. Note: • Vehicle speed may vary momentarily when driving up and down a steep hill. • If the vehicle speed increases above the set speed on a downhill, you may want to apply the brakes to reduce the speed. • If the vehicle speed decreases more than 10 mph (16 km/h) below your set speed on an uphill, your speed control will disengage. Disengaging speed control To disengage the speed control: • Depress the brake pedal. Disengaging the speed control will not erase previous set speed. Resuming a set speed Press the RSM control and release it. This will automatically return the RSM SET vehicle to the previously set speed. ACC The RSM control will not work if the vehicle speed is not faster than CST 30 mph (48 km/h). RSM SET ACC CST Increasing speed while using speed control There are two ways to set a higher speed: RSM SET ACC • Press and hold the SET ACC control until you get to the CST desired speed, then release the control. You can also use the SET ACC control to operate the Tap-Up function. Press and release this control to increase the vehicle set speed in small amounts by 1 mph (1.6 km/h). 60 2007 Escape (204) Owners Guide (post-2002-fmt) USA (fus)