2009 Ford E150 Cargo Diesel Supplement 2nd Printing - Page 73

Scheduled Maintenance: E-Series 120,000 miles (192,000 km) ❑ Change engine oil and replace oil filter ❑ Replace engine- and frame-mounted fuel filters ❑ Change automatic transmission fluid and filter on all vehicles equipped with the Torqshift transmission. Consult your dealer for particular requirements. Replace front wheel bearing grease and grease seals on 4x2 wheel bearings (if non-sealed bearings) Rotate tires, inspect tires for wear and measure tread depth and inspect wheel ends for endplay and noise (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect air filter restriction gauge, replace filter as required Inspect and lubricate steering linkage, ball joints, suspension, tie rod ends, driveshaft and U-joints (lubricate if equipped with Zerk fittings) Inspect engine cooling system level, coolant strength and hoses Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system Inspect exhaust system and heat shields Inspect accessory drive belt(s) Perform multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 127,500 miles (204,000 km) ❑ Change engine oil and replace oil filter ❑ Rotate tires, inspect tires for wear and measure tread depth ❑ ❑ DEALER VALIDATION: and inspect wheel ends for endplay and noise (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect air filter restriction gauge, replace filter as required Perform multi-point inspection (recommended) RO#: DATE: P&A CODE: MILEAGE: 73 2009 Econoline (eco) Supplement, 2nd Printing USA (fus)