2009 Ford E150 Cargo Diesel Supplement 2nd Printing - Page 94

2009 Ford E150 Cargo Manual

Page 94 highlights

Scheduled Maintenance: F-Super Duty Operating in dusty conditions such as unpaved or dusty roads Every 5,000 miles (8,000 km) Check air filter restriction gauge (replace air filter as required or when air filter restriction gauge indicates) Inspect and lubricate steering and suspension ball joints and tie rods (if equipped with zerk fittings) Inspect brake system pads and rotors Rotate tires, inspect tires for wear and measure tread depth and inspect wheel ends for endplay and noise Every 5,000 miles (8,000 km) or Change engine oil and replace filter 6 months Inspect and lubricate U-joints Every 10,000 miles (16,000 km) or Change engine-mounted fuel filter and chassis-mounted 400 hours of engine operation (HFCM) fuel filter (whichever comes first) Every 30,000 miles (48,000 km) Replace wheel bearing grease and grease seals on 4x2 wheel bearings (if non-sealed bearings) 94 2009 Econoline (eco) Supplement, 2nd Printing USA (fus)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

Operating in dusty conditions such as unpaved or dusty roads
Every 5,000 miles (8,000 km)
Check air filter restriction gauge (replace air filter as
required or when air filter restriction gauge indicates)
Inspect and lubricate steering and suspension ball joints
and tie rods (if equipped with zerk fittings)
Inspect brake system pads and rotors
Rotate tires, inspect tires for wear and measure tread
depth and inspect wheel ends for endplay and noise
Every 5,000 miles (8,000 km) or
6 months
Change engine oil and replace filter
Inspect and lubricate U-joints
Every 10,000 miles (16,000 km) or
400 hours of engine operation
(whichever comes first)
Change engine-mounted fuel filter and chassis-mounted
(HFCM) fuel filter
Every 30,000 miles (48,000 km)
Replace wheel bearing grease and grease seals on 4x2
wheel bearings (if non-sealed bearings)
2009 Econoline
(eco)
Supplement, 2nd Printing
USA
(fus)
Scheduled Maintenance: F-Super Duty
94