2009 Ford E150 Cargo Diesel Supplement 2nd Printing - Page 85

2009 Ford E150 Cargo Manual

Page 85 highlights

Scheduled Maintenance: F-Super Duty 50,000 miles (80,000 km) ❑ Change engine oil and replace oil filter ❑ Rotate tires, inspect tires for wear and measure tread depth and inspect wheels for endplay and noise (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect air filter restriction gauge, replace filter as required Change rear axle fluid (DANA axles only. Refer to Special Operating Conditions for more information) Lubricate steering linkage, ball joints, suspension, tie rod ends, drive shaft, 4x4 front axle U-joints and U-joints (lubricate if equipped with Zerk fittings) Perform multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 60,000 miles (96,000 km) ❑ Change engine oil and replace oil filter ❑ Rotate tires, inspect tires for wear and measure tread depth and inspect wheels for endplay and noise (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect air filter restriction gauge, replace filter as required Replace engine- and frame-mounted fuel filters Inspect fuel cooling system level, strength and hoses Inspect engine cooling system level, coolant strength and hoses Inspect brake pads/shoes/rotors/drums, brakes lines & hoses, and parking brake system Replace front wheel bearing grease and grease seals on 4x2 wheel bearings (if non-sealed bearings) Inspect exhaust system and heat shields Change automatic transmission fluid and filter on all vehicles equipped with the Torqshift transmission. Consult your dealer for particular requirements. Inspect and lubricate steering linkage, ball joints, suspension, tie rod ends, drive shaft, 4x4 front axle U-joints and U-joints Perform multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 85 2009 Econoline (eco) Supplement, 2nd Printing USA (fus)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

50,000 miles (80,000 km)
Change engine oil and replace oil filter
Rotate tires, inspect tires for wear and measure tread depth
and inspect wheels for endplay and noise (vehicles with dual
rear wheels should only rotate if unusual wear is noted)
Inspect air filter restriction gauge, replace filter as required
Change rear axle fluid (DANA axles only. Refer to
Special
Operating Conditions
for more information)
Lubricate steering linkage, ball joints, suspension, tie rod
ends, drive shaft, 4x4 front axle U-joints and U-joints (lubri-
cate if equipped with Zerk fittings)
Perform multi-point inspection (recommended)
D
EALER
V
ALIDATION
:
RO#:
P&A C
ODE
:
D
ATE
:
M
ILEAGE
:
60,000 miles (96,000 km)
Change engine oil and replace oil filter
Rotate tires, inspect tires for wear and measure tread depth
and inspect wheels for endplay and noise (vehicles with dual
rear wheels should only rotate if unusual wear is noted)
Inspect air filter restriction gauge, replace filter as required
Replace engine- and frame-mounted fuel filters
Inspect fuel cooling system level, strength and hoses
Inspect engine cooling system level, coolant strength and
hoses
Inspect brake pads/shoes/rotors/drums, brakes lines &
hoses, and parking brake system
Replace front wheel bearing grease and grease seals on 4x2
wheel bearings (if non-sealed bearings)
Inspect exhaust system and heat shields
Change automatic transmission fluid and filter on all vehicles
equipped with the Torqshift transmission. Consult your dealer
for particular requirements.
Inspect and lubricate steering linkage, ball joints, suspension,
tie rod ends, drive shaft, 4x4 front axle U-joints and U-joints
Perform multi-point inspection (recommended)
D
EALER
V
ALIDATION
:
RO#:
P&A C
ODE
:
D
ATE
:
M
ILEAGE
:
2009 Econoline
(eco)
Supplement, 2nd Printing
USA
(fus)
Scheduled Maintenance: F-Super Duty
85