2009 Ford E150 Cargo Diesel Supplement 2nd Printing - Page 75

2009 Ford E150 Cargo Manual

Page 75 highlights

Scheduled Maintenance: E-Series 150,000 miles (240,000 km) ❑ Change engine oil and replace oil filter ❑ Replace engine- and frame-mounted fuel filters ❑ Replace accessory drive belt(s) (if not replaced in the last ❑ Replace front wheel bearing and wheel bearing grease seals ❑ Change Premium Gold coolant (see Motorcraft Premium Gold ❑ Change rear wheel drive (RWD) axle fluid - DANA axles not Coolant Change Record) DEALER VALIDATION: 100,000 miles [160,000 km]) (if non-sealed bearings) using synthetic fluid only Rotate tires, inspect tires for wear and measure tread depth and inspect wheel ends for endplay and noise (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect air filter restriction gauge, replace filter as required Inspect and lubricate steering linkage, ball joints, suspension, tie rod ends, driveshaft and U-joints (lubricate if equipped with Zerk fittings) Inspect engine cooling system level, coolant strength and hoses Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system. Inspect exhaust system and heat shields Inspect automatic transmission fluid level Perform multi-point inspection (recommended) RO#: DATE: P&A CODE: MILEAGE: 75 2009 Econoline (eco) Supplement, 2nd Printing USA (fus)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

150,000 miles (240,000 km)
Change engine oil and replace oil filter
Replace engine- and frame-mounted fuel filters
Replace accessory drive belt(s) (if not replaced in the last
100,000 miles [160,000 km])
Replace front wheel bearing and wheel bearing grease seals
(if non-sealed bearings)
Change Premium Gold coolant (see Motorcraft Premium Gold
Coolant Change Record)
Change rear wheel drive (RWD) axle fluid - DANA axles
not
using synthetic fluid only
Rotate tires, inspect tires for wear and measure tread depth
and inspect wheel ends for endplay and noise (vehicles with
dual rear wheels should only rotate if unusual wear is noted)
Inspect air filter restriction gauge, replace filter as required
Inspect and lubricate steering linkage, ball joints, suspension,
tie rod ends, driveshaft and U-joints (lubricate if equipped
with Zerk fittings)
Inspect engine cooling system level, coolant strength and
hoses
Inspect brake pads, shoes, rotors, drums, brake lines and
hoses and parking brake system.
Inspect exhaust system and heat shields
Inspect automatic transmission fluid level
Perform multi-point inspection (recommended)
D
EALER
V
ALIDATION
:
RO#:
P&A C
ODE
:
D
ATE
:
M
ILEAGE
:
2009 Econoline
(eco)
Supplement, 2nd Printing
USA
(fus)
Scheduled Maintenance: E-Series
75