2012 Ford F150 Owner Guide 2nd Printing - Page 111

Driver Controls Resuming a set speed Press and release RSM. This will automatically return the vehicle to the previously set speed. Increasing speed while using speed control To increase the set speed: • Press and hold SET + until you get to the desired speed, then release. You can also use SET + to operate the tap-up function. Press and release SET + to increase the vehicle set speed in approximately 1 mph (2 km/h) increments. • Use the accelerator pedal to get to the desired speed then press and release SET +. Reducing speed while using speed control To reduce the set speed: • Press and hold - SET until you get to the desired speed, then release. You can also use - SET to operate the tap-down function. Press and release - SET to decrease the vehicle set speed in approximately 1 mph (2 km/h) increments. • Press the brake pedal or the clutch pedal (if equipped) until the desired vehicle speed is reached then press SET +. Turning off speed control To turn off the speed control, press OFF or turn off the ignition. Note: When you turn off the speed control or the ignition, your speed control set speed memory is erased. UNIVERSAL GARAGE DOOR OPENER (IF EQUIPPED) The appearance of your vehicle's universal garage door opener will vary according to your option package. Before programing, make sure you identify which transmitter you have by comparing it to the graphics below. 111 2012 F-150 (f12) Owners Guide, 2nd Printing USA (fus)