2012 Ford F150 Owner Guide 2nd Printing - Page 122

Driver Controls Programming HomeLinkா to the Genie Intellicodeா 2 powerhead Note: You may need a ladder to access the garage door opener powerhead unit. To put the Genie IC2 powerhead in program mode you will need to access the program button. The program button is a square button located on the garage door opener powerhead unit. To program HomeLink௡ to the powerhead 1. Press and hold the program button on the Genie IC2 Powerhead until both blue LED's turn on. 2. Release the program button. Only the smaller round LED should be on. 3. Press and release the program button. The larger purple LED should now be flashing Note: The next 2 steps must be completed in 30 seconds. 4. Press and release the Genie IC2 transmitter's previously programmed button. Both LED's on the powerhead unit should now flash purple. 5. Press and hold the previously programmed HomeLink௡ button for 2 seconds. Repeat this step up to 3 times until the garage door moves. At this point HomeLink௡ programming is complete. Clearing a HomeLinkா device To erase programming from the three HomeLink௡ buttons press and hold the two outer HomeLink௡ buttons until the indicator light begins to flash. The led will begin flashing in 10 to 20 seconds, at which time both buttons should be released. Programming has now been erased, and the led should blink slowly to indicate the device is in train mode when any of the three HomeLink buttons are pressed. FCC and RSS-210 Industry Canada Compliance This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to your device not expressly approved by the party responsible for compliance can void the user's authority to operate the equipment. 122 2012 F-150 (f12) Owners Guide, 2nd Printing USA (fus)