2012 Ford F150 Owner Guide 2nd Printing - Page 174

Seating and Safety Restraints Memory seat/power mirrors/adjustable pedals/steering column (if equipped) This system allows automatic positioning of the driver seat, power mirrors, adjustable pedals, and steering column to two programmable positions. The memory seat control is located on the driver's seat. • To program position 1, move the memory features to the desired positions using the associated controls. Press and hold button 1 for at least two seconds. A chime will sound confirming that a memory position has been set. • To program position 2, repeat the previous procedure using button 2. A memory seat position may be programmed at any time. To program the memory feature to a remote entry transmitter, refer to Remote entry system in the Locks and Security chapter. A programmed memory position can be recalled: • in any gearshift position if the ignition is not on. • only in P (Park) or N (Neutral) if the ignition is on. The memory positions are also recalled when you press your remote entry transmitter (unlock) control (if the transmitter is programmed to a memory position) or, when you enter a valid personal entry code that is programmed to a memory position. The mirrors will move to the programmed position and the seat will move to the easy entry position. The seat will move to the final position when the key is in the ignition (if easy entry feature is enabled). Easy-access/easy-out feature (if equipped) The easy entry feature can be turned off or on through the vehicle message center. Refer to Message center in the Instrument Cluster chapter. The easy entry feature automatically moves the driver's seat 2 inches (5 cm) forward when: • the transmission is in P (Park) • the key is inserted into the ignition cylinder 174 2012 F-150 (f12) Owners Guide, 2nd Printing USA (fus)