2013 Ford F350 Super Duty Super Cab Owner Manual Printing 3 - Page 110

Information Displays 109 • RESET FOR CALIBRATION (if equipped): This feature calibrates the compass. The compass reading may be affected when you drive near large buildings, bridges, power lines and powerful broadcast antenna. Magnetic or metallic objects placed in, on or near the vehicle may also affect compass accuracy. If the compass appears to be inaccurate, a manual calibration may be necessary. Refer to Compass zone/calibration adjustment. Compass zone adjustment 1. Determine which magnetic zone you are in for your geographic 3 2 1 15 location by referring to the zone map. 2. Start the engine. 4 14 13 3. From the SETUP menu, press and release the RESET button until 5 12 the message center display changes to show the current zone setting ZONE XX RESET = CHANGE. 6 7 8 9 1011 4. Press and release the RESET button repeatedly until the correct zone setting for your geographic location is displayed on the information display. 5. Press and release SETUP, press INFO or allow the setup timer to expire to exit the procedure. Compass calibration adjustment Note: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential electrical accessories (heated rear window, heater, A/C, map lamps, wiper, etc.) and make sure all the doors are closed Note: If the RESET button is pressed or three minutes has expired, the display will go back to the INFO menu and will show CAL instead of the compass heading until the compass is calibrated. 1. Press the RESET button until the display reads RESET FOR CALIBRATION to start the compass calibration function. 2. Slowly drive the vehicle in a circle (less than 3 mph [5 km/h]) until the CIRCLE SLOWLY TO CALIBRATE display changes to CALIBRATION COMPLETED. It will take up to five circles to complete calibration. 2013 F-250/350/450/550 (f23) Owners Guide gf, 3rd Printing, December 2012 USA (fus)