2013 Ford F350 Super Duty Super Cab Owner Manual Printing 3 - Page 70

MyKey 69 The key is successfully created. Make sure you label it so you can distinguish it from the admin keys. You can also program configurable settings for the key(s). Refer to the Programming/Changing Optional Settings section. Programming/Changing Configurable Settings Use the information display to access your configurable MyKey settings. 1. Switch the ignition on with an admin key. 2. Access the main menu on the information display controls, and select Settings, then MyKey by pressing OK or > button. 3. Use the arrow buttons to get to a feature. 4. Press OK or > to make a selection. Note: You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey. Once you have switched the engine off, however, you will need an admin key to change or clear your MyKey settings. CLEARING ALL MYKEYS You can clear all MyKeys within the same key cycle as you created the MyKey. If you switch your ignition off, however, you will need to use an admin key to clear your MyKeys. Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status at once. To clear all MyKeys of all MyKey settings, use the information display to do the following: For Type 1 information display settings: 1. Access the main menu of your information display and press SETUP until PRESS RESET TO CLEAR MYKEY displays. 2. Press and release the RESET button. The display will show HOLD RESET TO CONFIRM CLEAR. 3. Press and hold the RESET button for two seconds until ALL MYKEYS CLEARED displays. For Type 2 information display settings: 1. Access main menu of your information display and select Settings, then MyKey. 2. Scroll to Clear All and press the OK button. 3. Hold the OK button until ALL MYKEYS CLEARED displays . 2013 F-250/350/450/550 (f23) Owners Guide gf, 3rd Printing, December 2012 USA (fus)