2013 Ford F350 Super Duty Super Cab Owner Manual Printing 3 - Page 64

Keys and Remote Control 63 4. Insert the new battery. Refer to the instructions inside the integrated keyhead transmitter for the correct orientation of the battery. Press the battery down to ensure that the battery is fully seated in the battery housing cavity. 5. Reinstall the rubber gasket. 6. Snap the battery cover back onto the key. Memory Feature (If Equipped) The feature allows the remote control to recall the driver seat, power mirrors and power adjustable foot pedals (if equipped) memory positions. Press the unlock button on the remote control to recall the memory positions. If the easy entry and exit feature is enabled, the seat will move to the easy entry position. The seat will move to the driver memory position when the key is put in the ignition. Programming Memory to the Transmitter 1. Move the memory features to the desired positions using the associated controls. 2. Press and hold memory button 1 on the driver door for five seconds. A tone will sound after about two seconds. 1 Continue to hold until a second tone is heard. 3. Within three seconds press the lock button on the remote control. 4. Wait 10 seconds, then press the unlock button on the 2 remote control. Repeat this procedure for memory button 2 and a second remote control if desired. Deactivating Memory from the Transmitter 1. Press and hold the desired memory button for five seconds. A tone will sound after about two seconds. Continue to hold until a second tone is heard. 2. Within three seconds press the unlock button on the remote control. Repeat this procedure for each additional transmitter if desired. 2013 F-250/350/450/550 (f23) Owners Guide gf, 3rd Printing, December 2012 USA (fus)