2013 Ford F350 Super Duty Super Cab Owner Manual Printing 3 - Page 258
2013 Ford F350 Super Duty Super Cab Manual
Page 258 highlights
Towing 257 3. Securely attach the loaded trailer to your vehicle without the weight-distributing bars connected. 4. Measure the height to the top of your vehicle's front wheel opening on the fender a second time. This is H2. 5. Install and adjust the tension in the weight-distributing bars so that the height of your vehicle's front wheel opening on the fender is approximately halfway between H1 and H2. 6. Check that the trailer is level or slightly nose down toward your vehicle. If not, adjust the ball height accordingly and repeat Steps 2-6. Once the trailer is level or slightly nose down toward the vehicle: • Lock the bar tension adjuster in place. • Check that the trailer tongue securely attaches and locks onto the hitch. • Install safety chains, lighting, and trailer brake controls as required by law or the trailer manufacturer. Fifth-Wheel Trailer Hitch (If Equipped) WARNING: The mounting pads in the bed are specifically designed for certain fifth-wheel trailer hitches and gooseneck ball hitches. Do not use these mounting pads for other purposes. Doing so could result in vehicle structural damage, loss of vehicle control, and personal injury. Contact an authorized dealer to purchase gooseneck and fifth-wheel hitches that are compatible with your vehicle. WARNING: Towing trailers beyond the maximum limit of the towing system could result in vehicle structural damage, loss of vehicle control and personal injury. WARNING: The hitch rating listed on the trailer hitch label is the maximum possible trailer rating. To find the maximum trailer weight allowed for your specific vehicle, consult an authorized dealer or the RV & Trailer Towing Guide provided by an authorized dealer. Your vehicle may be equipped with a fifth-wheel prep package. This package enables your vehicle to accept certain fifth-wheel trailer hitches and gooseneck ball hitches. The fifth-wheel trailer hitch attaches to the four mounting pads in the pick-up bed. An optional 7-pin trailer wiring connector may be in the bed as well. The gooseneck ball hitch is a separate mounting pad from the fifth-wheel hitch, located in the center of the bed. 2013 F-250/350/450/550 (f23) Owners Guide gf, 3rd Printing, December 2012 USA (fus)