2015 Ford Flex Owner Manual Printing 1 - Page 157

156 Seats MEMORY FUNCTION (IF EQUIPPED) This memory control, located on the driver door, allows automatic positioning of the driver seat and 2 1 power mirrors to two programmable positions. You may also have this feature for the steering column and power adjustable foot pedals. Programming a memory position 1. Switch the ignition on. 2. Adjust the memory features to your desired positions using the associated controls. 3. Press and hold the desired preset button for about two seconds until you hear a single tone. You can save up to two preset memory positions. You can save a memory preset at any time. Recalling a memory position Press and release the desired memory preset button to recall a saved memory position. You can recall a programmed memory position: • In any gearshift position if the ignition is not on. • Only in park (P) or neutral (N) if the ignition is on. Recalling a memory position with the remote control The memory positions are also recalled when you press unlock on your remote control (if the transmitter is programmed to a memory position) or, when you enter a valid personal entry code that is programmed to a memory position. To program the memory feature to a remote control, see the Keys and Remote Control chapter. Easy Entry and Exit Feature (If Equipped) This feature can move the seat rearward and the steering column up and forward to allow extra room to exit the vehicle. This occurs when: • You place the transmission in neutral (N) or park (P). 2015 Flex (471) Owners Guide gf, 1st Printing, October 2014 USA (fus)