2015 Ford Flex Owner Manual Printing 1 - Page 89

88 Security 1. Place the new unprogrammed intelligent access key in the backup slot inside the center console. The key ring must be at the rear with the buttons facing toward the right-hand side. 2. Press the driver or passenger power door unlock control three times. 3. Press and release the brake pedal one time. 4. Press the driver or passenger power door lock control three times. 5. Press and release the brake pedal one time. The indicator on the START/STOP button should begin to rapidly flash, indicating the programming mode has been entered and two programmed intelligent access keys have been detected in your vehicle. 6. Press the START/STOP button within one minute. A message will appear in the information display indicating that the new intelligent access key was programmed. 7. Remove the intelligent access key from the center console pocket and press the unlock button on the newly programmed intelligent access key to exit programming mode. 8. Verify that the remote entry functions operate (press lock then unlock, making sure you end in unlock) and that your vehicle starts with new intelligent access key. ANTI-THEFT ALARM (IF EQUIPPED) The system will warn you of unauthorized entry to your vehicle. The turn signal lamps will flash and sound the horn up to a total of 10 times when: • any door, the hood or the luggage compartment is opened without using the keypad, the remote control or the intelligent access transmitter (if equipped) • the ignition is turned on with an invalid key. Take all keys and remote controls to an authorized dealer if there is any potential alarm problem with your vehicle. 2015 Flex (471) Owners Guide gf, 1st Printing, October 2014 USA (fus)