2015 Ford Flex Owner Manual Printing 1 - Page 231

230 Cruise Control 1. Press and release ON. The information display will show the gray indicator light, current gap setting and SET. The system is set to standby mode. Setting Adaptive Cruise Control 2. Accelerate to the desired speed. 3. Press SET upward and release. The vehicle speed is stored in the memory. The information display will show a green indicator light, current gap setting and desired set speed. 4. Take your foot off the accelerator pedal. 5. A lead vehicle graphic will illuminate if there is a vehicle detected in front of you. Note: When adaptive cruise control is active, the speedometer may vary slightly from the set speed displayed in the information display. Following a Vehicle WARNING: When following a vehicle in front of you, your vehicle will not decelerate automatically to a stop, nor will your vehicle always decelerate quickly enough to avoid a collision without driver intervention. Always apply the brakes when necessary. Failing to do so may result in a collision, serious injury or death. WARNING: Adaptive cruise control only warns of vehicles detected by the radar sensor. In some cases there may be no warning or the warning may be delayed. The driver should always apply the brakes when necessary. Failing to do so may result in a collision, serious injury or death. Note: The brakes may emit a sound when they are being modulated by the adaptive cruise control system. 2015 Flex (471) Owners Guide gf, 1st Printing, October 2014 USA (fus)