2015 Ford Fusion Owner Manual Printing 1 - Page 256
2015 Ford Fusion Manual
Page 256 highlights
Maintenance Do not mix different colors or types of coolant in your vehicle. Mixing of engine coolants may harm your engine's cooling system. The use of an improper coolant may harm engine and cooling system components and may void the warranty. Use prediluted engine coolant meeting the Ford specification. See Capacities and Specifications (page 312). In case of emergency, you can add a large amount of water without engine coolant in order to reach a vehicle service location. In this instance, qualified personnel: 1. Must drain the cooling system. 2. Chemically clean the coolant system with Motorcraft Premium Cooling System Flush. 3. Refill with engine coolant as soon as possible. Water alone, without engine coolant, can cause engine damage from corrosion, overheating or freezing. Do not use the following as a coolant substitute: • Alcohol. • Methanol. • Brine. • Any engine coolant mixed with alcohol or methanol antifreeze or coolant. Alcohol and other liquids can cause engine damage from overheating or freezing. Do not add extra inhibitors or additives to the coolant. These can be harmful and compromise the corrosion protection of the engine coolant. When adding coolant: 1. Unscrew the cap slowly. Any pressure will escape as you unscrew the cap. 2. Add prediluted engine coolant meeting the Ford specification. See Capacities and Specifications (page 312). 3. Check the coolant level in the coolant reservoir the next few times you drive your vehicle. 4. If necessary, add enough prediluted engine coolant to bring the coolant level to the proper level. Recycled Engine Coolant Ford Motor Company does not recommend the use of recycled engine coolant since a Ford-approved recycling process is not yet available. Used engine coolant should be disposed of in an appropriate manner. Follow your community's regulations and standards for recycling and disposing of automotive fluids. Severe Climates If you drive in extremely cold climates: • It may be necessary to have a Ford authorized dealer increase the coolant concentration above 50%. • A coolant concentration of 60% will provide improved freeze point protection. Engine coolant concentrations above 60% will decrease the overheat protection characteristics of the engine coolant and may cause engine damage. If you drive in extremely hot climates: • It may be necessary to have a Ford authorized dealer decrease the coolant concentration to 40%. • A coolant concentration of 40% will provide improved overheat protection. Engine coolant concentrations below 40% will decrease the corrosion/freeze protection characteristics of the engine coolant and may cause engine damage. 253 Fusion/Mondeo (CC7), enUSA