2015 Ford Fusion Owner Manual Printing 1 - Page 70

Security 4. Within 10 seconds, place a second programmed intelligent access key in the backup slot and press the push button ignition switch. 5. Wait five seconds, and then press the push button ignition switch again. 6. Remove the intelligent access key. 7. Wait five seconds, then place the unprogrammed intelligent access key in the backup slot and press the push button ignition switch. Programming is now complete. Verify the remote control functions operate and your vehicle starts with the new intelligent access key. If the key does not work, wait 10 seconds and repeat Steps 1 through 7. If it still does not work, take your vehicle to an authorized dealer. • Unlock the doors or luggage compartment with the remote control or keyless entry keypad. Switch the ignition on or start the vehicle. Use a key in the driver 's door to unlock the vehicle, then switch the ignition on within 12 seconds. • • Note: Pressing the panic button on the remote control will stop the horn and signal indicators, but will not disarm the system. ANTI-THEFT ALARM The system will warn you of an unauthorized entry to your vehicle. It will be triggered if any door, the luggage compartment or the hood is opened without using the key, remote control or keyless entry keypad. The direction indicators will flash and the horn will sound if unauthorized entry is attempted while the alarm is armed. Take all remote controls to an authorized dealer if there is any potential alarm problem with your vehicle. Arming the Alarm The alarm is ready to arm when there is not a key in the ignition. Electronically lock the vehicle to arm the alarm. Disarming the Alarm Disarm the alarm by any of the following actions: 67 Fusion/Mondeo (CC7), enUSA