2015 Ford Fusion Owner Manual Printing 1 - Page 286
2015 Ford Fusion Manual
Page 286 highlights
Wheels and Tires 4. If required, turn on the compressor and adjust the tire to the recommended inflation pressure shown on the tire label located on the driver's door or door jamb area. The tire pressure should be checked with the compressor turned OFF in order to get an accurate pressure reading. 5. Unplug the hoses, re-install the valve cap on the tire and return the kit to the stowage area. Removal of the sealant canister from the kit What to do after the Tire has been Sealed After using the kit to seal your tire, you will need to replace the sealant canister. Sealant canisters and spare parts can be obtained at an authorized Ford dealer. Empty sealant canisters may be disposed of at home. However, canisters still containing liquid sealant should be disposed of by your local authorized Ford dealer or tire dealer, or in accordance with local waste disposal regulation. Note: After the sealing compound has been used, the maximum vehicle speed is 50 mph (80 km/h) and the maximum driving distance is 120 mi (200 km). The sealed tire should be inspected immediately. You can check the tire pressure any time within the 120 mi (200 km) by performing the steps listed previously in the Second stage: Checking Tire Pressure procedure. E175984 1. Unwrap the dual purpose hose (black tube) from the compressor housing. E175985 2. Unwrap the power cord. E175986 3. Remove the back cover. 283 Fusion/Mondeo (CC7), enUSA