2015 Ford Fusion Owner Manual Printing 1 - Page 260

Maintenance 5. Run the engine until it reaches normal operating temperature. While the engine is warming up, complete the following: Reset the clock. See Audio System (page 320). Reset the power windows bounce-back feature. See Windows and Mirrors (page 81). Reset the radio station presets. See Audio System (page 320). 6. Allow the engine to idle for at least one minute. If the engine turns off, step on the accelerator to start the engine. 7. While the engine is running, step on the brake pedal and shift the transmission to N. 8. Allow the engine to run for at least one minute by pressing on the accelerator pedal. 9. Drive the vehicle at least 10 miles (16 kilometers) to completely relearn the idle and fuel trim strategy. Note: If you do not allow the engine to relearn the idle and fuel trim strategy, the idle quality of your vehicle may be adversely affected until the engine computer eventually relearns the idle trim and fuel trim strategy. Note: Always dispose of automotive batteries in a responsible manner. Follow your local authorized standards for disposal. Call your local authorized recycling center to find out more about recycling automotive batteries. Note: It is recommended that the negative battery cable terminal be disconnected from the battery if you plan to store your vehicle for an extended period of time. CHECKING THE WIPER BLADES E142463 Run the tip of your fingers over the edge of the blade to check for roughness. Clean the wiper blades with washer fluid or water applied with a soft sponge or cloth. CHANGING THE WIPER BLADES The wiper arms can be manually moved when the ignition is off. This allows for ease of blade replacement and cleaning under the blades. 1 1 2 E129990 1. Pull the wiper blade and arm away from the glass. 2. Press the locking buttons together. 3. Rotate and remove the wiper blade. 4. Install in the reverse order. 257 Fusion/Mondeo (CC7), enUSA