2015 Ford Fusion Owner Manual Printing 1 - Page 310

Wheels and Tires 9. The vehicle jacking points are shown here, and can be identified by the triangle markings on the molding. The triangle marking may be located on the side or the underside of the molding. The jacking points are identified on vehicles without moldings by a pair of arrows on the metal flange pointing to the jacking point between them. Details are depicted on the warning label on the jack. 12. Replace the flat tire with the spare tire, making sure the valve stem is facing outward. Reinstall the lug nuts until the wheel is snug against the hub. Do not fully tighten the lug nuts until the wheel has been lowered. If you are using the temporary tire, the lug nut washers will not appear to be flush with the rim. This is normal only when using the temporary spare tire. Lower the wheel by turning the jack handle counterclockwise. 13. 1 3 4 5 E75442 2 14. 15. E174775 16. Remove the jack and fully tighten the lug nuts in the order shown. See Changing a Road Wheel (page 304). Put the flat tire, jack and lug wrench away. Make sure the jack is fastened securely before you drive. Unblock the wheel. 10. 11. Place the jack at the jacking point next to the tire you are changing. Turn the jack handle clockwise until the wheel is completely off the ground. Remove the lug nuts with the lug wrench. Type 2 1. Park on a level surface, set the parking brake and activate the hazard flashers. 2. Place the transmission in park (P) and turn the engine off. For vehicles with a manual transmission, place the transmission in reverse (R) after the engine is turned off. 307 Fusion/Mondeo (CC7), enUSA