2015 Ford Fusion Owner Manual Printing 1 - Page 33
2015 Ford Fusion Manual
Page 33 highlights
Safety Belts How to Disengage the Automatic Locking Mode Unbuckle the combination lap and shoulder belt and allow it to retract completely to disengage the automatic locking mode and activate the vehicle sensitive (emergency) locking mode. Rear Inflatable Safety Belt (If Equipped) E142591 WARNING Do not attempt to service, repair, or modify the rear inflatable safety belt. The rear inflatable safety belts are fitted in the shoulder portion of the safety belts of the second-row outboard seating positions. Note: The rear inflatable safety belts are compatible with most infant and child safety car seats and belt positioning booster seats when properly installed. This is because they are designed to fill with a cooled gas at a lower pressure and at a slower rate than traditional airbags. After inflation, the shoulder portion of the safety belt remains cool to the touch. The rear inflatable safety belt consists of the following: • An inflatable bag located in the shoulder safety belt webbing. • Lap safety belt webbing with automatic locking mode. • The same warning light, electronic control and diagnostic unit as used for the front safety belts. • Impact sensors located in various parts of the vehicle. 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is pulled out. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode. Rear outboard inflatable safety belts (second row only-if equipped) E146363 1. Buckle the combination lap and shoulder belt. 2. Grasp the lap portion of the belt and pull upward until the entire belt is pulled out. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode. 30 Fusion/Mondeo (CC7), enUSA