2010 Jeep Grand Cherokee Owner Manual SRT8 - Page 149

148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The cargo load floor is held by spring loaded latches. In REAR WINDOW FEATURES order to use the cargo load floor, use the following Rear Window Wiper/Washer procedure: The rear wiper/washer is controlled by a rotary switch NOTE: The cargo load floor latches should not be located on the control lever. The control lever is located used as cargo tie-downs. on the right side of the steering column. 1. Flip up the pull loop(s) so they are perpendicular (straight up) to the top surface of the tray. 2. Pull up on the loop(s) and twist 90 degrees, so they are parallel to the slotted hole in the tray. 3. Lift the tray over the loop(s), and reposition the tray. 4. Pull up on the loop(s) and twist 90 degrees, so they are perpendicular (straight up) to the slotted hole in tray. 5. Push the loop(s) back down, so they are parallel to the top of the tray. Rear Wiper/Washer Control