2010 Jeep Grand Cherokee Owner Manual SRT8 - Page 96
2010 Jeep Grand Cherokee Manual
Page 96 highlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Your vehicle is equipped with two RKE transmitters. One or both RKE transmitters can be linked to either memory position. The memory system can accommodate up to four RKE transmitters, each one linked to either of the two memory positions. Setting Memory Positions and Linking Remote Keyless Entry Transmitter to Memory 3. Adjust the driver's seat, recliner, and driver's sideview mirror to the desired positions. 4. Adjust the brake and accelerator pedals to the desired positions. 5. Turn on the radio and set the radio station presets (up to 12 AM and 12 FM stations can be set). 3 6. Turn the ignition switch to the LOCK position and NOTE: Each time the S (SET) button and a numbered remove the key. button 1 or 2 are pressed, you erase the memory settings 7. Press and release the S (SET) button located on the for that button and store a new one. driver's door. 1. Insert the ignition key, and turn the ignition switch to 8. Within five seconds, press and release MEMORY the ON position. 2. Press the driver door MEMORY button number 1 if button 1 or 2 on the driver's door. The next step must be you are setting the memory for driver 1, or button performed within five seconds if you desire to also use a number 2 if you are setting the memory for driver 2. The RKE transmitter to recall memory positions. system will recall any stored settings. Wait for the system 9. Press and release the LOCK button on one of the RKE to complete the memory recall before continuing to transmitters. Step 3.