2010 Jeep Grand Cherokee Owner Manual SRT8 - Page 97

96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 10. Insert the ignition key, and turn the ignition switch to To recall the memory settings for driver one, press MEMORY button number 1 on the driver's door, or the the ON position. UNLOCK button on the RKE transmitter linked to 11. Select ЉRemote Linked to MemoryЉ in the Electronic memory position 1. Vehicle Information Center (EVIC) and enter ЉYesЉ. Refer to "Electronic Vehicle Information Center (EVIC)/ To recall the memory setting for driver two, press Customer-Programmable Features" in "Understanding MEMORY button number 2 on the driver's door, or the UNLOCK button on the RKE transmitter linked to Your Instrument Panel" for further information. memory position 2. 12. Repeat the above steps to set the next memory position, using the other numbered memory button, or to A recall can be cancelled by pressing any of the MEMORY buttons on the drivers door during a recall (S, link another RKE transmitter to memory. 1, or 2). When a recall is cancelled, the driver's seat, Memory Position Recall driver's mirror and the pedals stop moving. A delay of NOTE: The vehicle must be in PARK to recall memory one second will occur before another recall can be positions. If a recall is attempted when the vehicle is not selected. in PARK, a message will be displayed in the Electronic To Disable a RKE Transmitter Linked to Memory Vehicle Information Center (EVIC). 1. Turn the ignition switch to the LOCK position, and remove the key.