1998 Lincoln Navigator Owner's Manual - Page 44
1998 Lincoln Navigator Manual
Page 44 highlights
Controls and features vehicle crosses multiple zones. A correct zone setting will eliminate this error. Refer to Compass zone adjustment. Compass zone adjustment 1. Determine which magnetic zone you are in for your geographic location by referring to the zone map. 1 2 3 13 4 12 5 6 7 8 9 10 11 15 14 2. Locate the compass module mounted at the base of the mirror. 3. Turn ignition to the ON position. 4. Insert an appropriate diameter rod (paperclip) into the small hole underneath the compass module and gently press the switch for 1 to 2 seconds until ZONE and the current zone setting is displayed on the trip computer. 5. Release the switch, then slowly press down again. Press the switch repeatedly until the correct zone setting for your geographic location is displayed on the trip computer. 6. To exit the zone setting mode, release pressure from the switch for greater than two seconds. 44