2013 Lincoln Navigator Owner Manual Printing 1 - Page 158

158 MEMORY FUNCTION Seats This feature will save and recall the positions of the driver seat, power mirrors, adjustable pedals, and steering column. The memory seat control is located on left side of the driver's seat. 1 2 Programming Memory Positions 1. To program position 1, move the memory features to their desired position using the associated controls. 2. Press and hold button 1 for about two seconds. A chime will sound confirming that a memory position has been set. To program position 2, repeat the previous procedure using button 2. A memory position may be programmed at any time. To program the memory feature to a remote entry transmitter, see the Keys and Remote Control chapter. Recalling Saved Memory Positions To recall position 1 settings, press and release memory button 1. The memory features will move to the saved memory 1 position. The memory positions can also be recalled when you: • press your remote entry transmitter unlock control (if the transmitter is programmed to a memory position) or, • enter a valid personal entry code that is programmed to a memory position. If the easy entry/exit feature is enabled, the mirrors and pedals will move to the programmed memory position and the seat will move to the easy entry position. The seat will move to the driving memory position when the ignition is activated. A programmed memory position can be recalled: • in any gearshift position if the ignition is not on. • only in position P or N if the ignition is on. 2013 Navigator (nav) Owners Guide gf, 1st Printing USA (fus)