2013 Lincoln Navigator Owner Manual Printing 1 - Page 61

MyKey 61 In addition to the key that has been programmed as a MyKey, owners of vehicles equipped with traditional keys have the option to program the non-Ford-approved remote start system as a MyKey if the remote start fob is used by the MyKey driver. To program a non-Ford-approved remote start system as a MyKey, do the following: 1. Enter the vehicle and close all doors. 2. Remote start the vehicle using a non-Ford approved remote start fob. 3. Follow Steps 1-5 in the Creating a MyKey section. Vehicles Equipped with Intelligent Access Key (Push Button Start) Note: It is not possible to program the remote start system as a MyKey on vehicles equipped with intelligent access key (push button start). Therefore, you should treat the remote start fob as you would any other admin key. When the vehicle is started using remote start, the system will stall the engine when you either enter the vehicle or shift the vehicle into gear. Prior to the engine stall, the vehicle will have administrative privileges. When you restart the engine, the vehicle will identify the user as an admin or MyKey driver depending on the settings of the actual key used to start the vehicle. Note: For all vehicles, the number of MYKEY(S) PROGRAMMED or ADMIN KEYS PROGRAMMED that is displayed in the MyKey system status menu, may include the non-Ford-approved remote start system as an additional key in the total count. See the Checking System Status section. For all vehicles with a non-Ford-approved remote start installed, it is possible to program all real keys as MyKeys, in which case, you will need to use your remote start system to clear all MyKeys (which removes all restrictions and returns them to admin key status) by doing the following: 1. Enter the vehicle and close all doors. 2. Remote start the vehicle using your non-Ford-approved remote start fob. 3. Follow Steps 1-3 in the Clearing all MyKeys section. 2013 Navigator (nav) Owners Guide gf, 1st Printing USA (fus)