2013 Lincoln Navigator Owner Manual Printing 1 - Page 295

Maintenance Replacing Supplemental Tail Lamp Bulbs 1. Make sure the headlamp switch is in the off position. 295 2. Open the liftgate and remove interior trim panel. 3. Remove four nuts from the lamp assembly. 4. Carefully pry the lamp assembly away from the vehicle by pulling the assembly directly straight out to expose the bulb socket. DO NOT TIP THE LAMP ASSEMBLY SIDEWAYS. 5. Rotate the bulb socket counterclockwise and remove from lamp assembly. 6. Pull bulb straight out of socket and push in the new bulb. 7. Install the bulb socket into the lamp assembly and rotate clockwise. 8. Install the lamp assembly on the vehicle and secure with four nuts. 9. Install the interior trim panel. Replacing License Plate Lamp Bulbs The license plate bulbs are located in the license plate housing assembly on the liftgate. To change the license plate bulbs: 1. Make sure the headlamp switch is in the off position. 2. Remove the license lamp screw from the assembly. 3. Pull the lamp down and twist the bulb socket counterclockwise. Remove the bulb socket from the lamp. 4. Pull out the old bulb and push in the new bulb. 5. Install the bulb socket in the lamp assembly by turning it clockwise. 6. Install the lamp assembly and secure it with the retaining screw. 2013 Navigator (nav) Owners Guide gf, 1st Printing USA (fus)