2003 Mazda Protege Owner's Manual - Page 109

J39L_EA.book Page 14 Saturday, June 8, 2002 5:35 PM Driving Your Mazda Starting and Driving M Shift-Lock System The shift-lock system prevents shifting out of P unless the brake pedal is depressed. To shift from P: 1. Depress and hold the brake pedal. 2. Start the engine. 3. Move the shift lever. NOTE WARNING Shifting from N or P: It's dangerous to shift from N or P into a driving gear when the engine is running faster than idle. If this is done, the vehicle could move suddenly, causing an accident or serious injury. If the engine is running faster than idle, don't shift from N or P into a driving gear. Shifting into N while Driving: Shifting into N while driving is dangerous. Engine braking cannot be applied when decelerating which could lead to an accident or serious injury. Do not shift into N when driving the vehicle. D (Drive) D is the normal driving position. From a stop, the transaxle will automatically shift through a 4-gear sequence. M (Manual) M is the manual shift mode position. Gears can be shifted up or down by tapping the shift lever back or forward from this position. • When the ignition switch is in the ACC or LOCK position, the transaxle cannot be shifted from P. • To be sure the vehicle is in park, the ignition key cannot be removed unless the shift lever is in P. M Shift-Lock Override If the shift lever won't move from P with the brake pedal depressed, continue to hold down the pedal. 1. Remove the shift-lock override cover with a screwdriver. 2. Insert a screwdriver and push it down. 5-14 Form No. 8Q94-EA-02G