2003 Mazda Protege Owner's Manual - Page 92
2003 Mazda Protege Manual
Page 92 highlights
J39L_EA.book Page 9 Saturday, June 8, 2002 5:35 PM Before Driving Your Mazda Driving Tips M Tire Chains Installing the chains 1. Remove the wheel covers, or the chain bands will scratch them. 2. Secure the chains on the front tires as tightly as possible. Always follow the chain manufacturer's instructions. 3. Retighten the chains after driving 1/2-1 km (1/4-1/2 mile). CAUTION • Chains may scratch or chip aluminum wheels. Install tire chains on steel wheels only. • Chains may affect handling. • Don't go faster than 50 km/h (30 mph) or the chain manufacturer's recommended limit, whichever is lower. • Drive carefully and avoid bumps, holes, and sharp turns. • Avoid locked-wheel braking. • Don't use chains on the temporary tire; it may result in damage to the vehicle and to the tire. • Don't use chains on roads that are free of snow or ice. The tires and chains could be damaged. NOTE (MAZDASPEED Protegé) Use of tire chains on a vehicle equipped with 215/45ZR17 specification tires and rim could cause interference with the vehicle body and scratching. If tire chains are to be used, replace both front and rear tires with P195/50R16 tires. Please consult an Authorized Mazda Dealer. Check local regulations before using tire chains. Install the chains on the front tires. Don't use chains on the rear tires. Use only SAE Class "S" chains, and make sure they fit. 4-9 Form No. 8Q94-EA-02G