2010 Mazda CX-7 Owner's Manual - Page 188

CX-7_8AS7-EA-09E_Edition2 Page188 Friday, June 5 2009 2:25 PM Black plate (188,1) Driving Your Mazda Starting and Driving qTCS OFF Indicator Light NOTE If the battery is disconnected or a fuse is replaced, the DSC will be inoperable. When this happens, the TCS OFF indicator light flashes and the TCS/DSC indicator light illuminates. To reactivate the DSC, perform the following procedure with the battery connected. This indicator light stays on for a few seconds when the ignition switch is turned to the ON position. It also illuminates when the TCS OFF switch is pressed and TCS is switched off. Refer to TCS OFF Switch on page 5-25. If the light remains illuminated and the TCS is not switched off, take your vehicle to an Authorized Mazda Dealer. The dynamic stability control may have a malfunction. 1. Turn the ignition switch to the ON position. 2. Turn the steering clockwise fully, then turn it counterclockwise fully. 3. Make sure the TCS OFF indicator light turns off. 4. Turn the ignition switch to the OFF position, then turn it to the ON position again. 5. Make sure the TCS/DSC indicator light turns off. If the TCS/DSC indicator light and the TCS OFF indicator light remain illuminated even after turning the ignition switch to the ON position, attempt the procedure again. If this still does not work, consult an Authorized Mazda Dealer. 5-24 Form No.8AS7-EA-09E