2010 Mazda CX-7 Owner's Manual - Page 405
2010 Mazda CX-7 Manual
Page 405 highlights
CX-7_8AS7-EA-09E_Edition2 Page405 Friday, June 5 2009 2:26 PM Black plate (405,1) Maintenance and Care Owner Maintenance The quality designation SM, or ILSAC must be on the label. 5. Pull out the dipstick, wipe it clean, and reinsert it fully. -30 -20 -10 0 10 20 30 40 50 -20 0 20 40 60 80 100 120 5W-30 Max OK Min qInspecting Engine Oil Level 2.3-liter engine 1. Be sure the vehicle is on a level surface. 2. Warm up the engine to normal operating temperature. 3. Turn it off and wait at least 5 minutes for the oil to return to the oil pan. 4. Open the cap. 6. Pull it out again and examine the level. The level is normal if it is between MIN and MAX. If it is near or below MIN, add enough oil to bring the level to MAX. CAUTION Do not add engine oil over MAX. This may cause engine damage. 7. Make sure the O-ring on the dipstick is positioned properly before reinserting the dipstick. 8. Reinsert the dipstick fully. 9. Close the cap. 8-21 Form No.8AS7-EA-09E