2010 Mazda CX-7 Owner's Manual - Page 344

CX-7_8AS7-EA-09E_Edition2 Page344 Friday, June 5 2009 2:26 PM Black plate (344,1) Interior Comfort Interior Equipment qClock The time is displayed when the ignition is switched to ACC or ON. With navigation system Time zone switching 1. Press the INFO switch until the SETTINGS screen is displayed. 2. Select PREFERENCES by pressing the Enter (up/down) switch up or down, and then press the Enter (up/down) switch. 3. Select TIME ZONE by pressing the Enter (up/down) switch up or down, and then press the Enter (up/down) switch. Time setting 1. Turn the ignition switch to the ACC or ON position. 2. Adjust the time using the time setting buttons ( , ). The hours advance while the time setting button ( ) is pressed. The minutes advance while the time setting button ( ) is pressed. Time resetting 1. Turn the ignition switch to the ACC or ON position. 2. Press the :00 button. 3. When the button is pressed, the time will be reset as follows: (Example) 12:01―12:29→12:00 12:30―12:59→1:00 NOTE When the :00 button is pressed, the seconds will start at "00". 4. Select the desired time zone by pressing the Enter (up/down) switch up or down, and then press the Enter (up/ down) switch. NOTE l l l Daylight saving time is not reflected in the time zone displayed. The clock does not display if there is no GPS signal reception. If the battery cables are disconnected and then reconnected, the clock does not operate until a GPS signal is received. Do not place objects on the dashboard, otherwise the clock may be unable to receive the GPS signal normally. 6-104 Form No.8AS7-EA-09E