2010 Mazda CX-7 Owner's Manual - Page 221
2010 Mazda CX-7 Manual
Page 221 highlights
CX-7_8AS7-EA-09E_Edition2 Page221 Friday, June 5 2009 2:25 PM Black plate (221,1) Driving Your Mazda Warning/Indicator Lights and Beep Sounds NOTE If the battery is disconnected or a fuse is replaced, the DSC will be inoperable. When this happens, the TCS OFF indicator light flashes and the TCS/DSC indicator light illuminates. To reactivate the DSC, perform the following procedure with the battery connected. 1. Turn the ignition switch to the ON position. 2. Turn the steering clockwise fully, then turn it counterclockwise fully. 3. Make sure the TCS OFF indicator light turns off. 4. Turn the ignition switch to the OFF position, then turn it to the ON position again. 5. Make sure the TCS/DSC indicator light turns off. If the TCS/DSC indicator light and the TCS OFF indicator light remain illuminated even after turning the ignition switch to the ON position, attempt the procedure again. If this still does not work, consult an Authorized Mazda Dealer. Cruise Main Indicator Light (Amber) The indicator light illuminates amber when the ON switch is pressed and the cruise control system is activated. Cruise Set Indicator Light (Green) The indicator light illuminates green when a cruising speed has been set. qBSM OFF Indicator Light í This indicator light illuminates for a few seconds when the ignition switch is turned to the ON position. The BSM OFF indicator light illuminates when the BSM system is turned off by pressing the BSM OFF switch. The indicator light flashes if the BSM system has a malfunction. Consult an Authorized Mazda Dealer. NOTE If the vehicle is driven on a road with less traffic and few vehicles that the radar sensors can detect, the system may pause (The BSM OFF indicator light in the instrument panel flashes). However, it does not indicate a malfunction. qCruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green) The indicator light has two colors. í Some models. 5-57 Form No.8AS7-EA-09E