2010 Mazda CX-7 Owner's Manual - Page 430
2010 Mazda CX-7 Manual
Page 430 highlights
CX-7_8AS7-EA-09E_Edition2 Page430 Friday, June 5 2009 2:27 PM Black plate (430,1) Maintenance and Care Owner Maintenance Brake lights/Taillights NOTE To replace the bulb, contact an Authorized Mazda Dealer. High-mount brake light, Side turn signal lights í Due to the complexity and difficulty of the procedure, the LED bulbs should be replaced by an Authorized Mazda Dealer. NOTE LED bulb replacement is not possible. The rear combination component must be replaced. Rear turn signal lights License plate lights 1. Make sure the ignition is switched off, and the headlight switch is off. 2. Wrap a flathead screwdriver with a soft cloth to prevent damage to the lens and remove the lens by carefully prying on the edge of the lens with a flathead screwdriver. 3. Disconnect the bulb by pulling it out. Reverse lights 4. Install the new bulb in the reverse order of removal. 5. Install the new bulb in the reverse order of removal. 8-46 í Some models. Form No.8AS7-EA-09E