2010 Mazda CX-7 Owner's Manual - Page 19
2010 Mazda CX-7 Manual
Page 19 highlights
CX-7_8AS7-EA-09E_Edition2 Page19 Friday, June 5 2009 2:23 PM Black plate (19,1) Essential Safety Equipment Seats Operation using the seat-side buttons Programming Park the vehicle in a safe location before performing the seat position programming. (Vehicle must be stopped) 1. Adjust the seat to the desired position. For each seat position adjustment method refer to the following pages: Seat Slide (page 2-5) Seat Recline (page 2-5) Height Adjustment (page 2-6) 2. Press the desired programming button 1, 2, or 3 while pressing the set button until a beep sound is heard. The button is programmed after a beep sound is heard. Other buttons can be programmed using the same procedure. NOTE Vehicle maintenance or other reasons requiring the vehicle battery to be disconnected will result in the seat position memory being erased. In this case, re-program the seat positions. NOTE In the following cases, the seat position set function cancels: l Any of the seat adjustment switches are operated. l The set button is pressed. l A programming button 1, 2, or 3 is pressed. l The vehicle starts moving. l Vehicle locking/unlocking is done using the transmitter. l Vehicle locking/unlocking is done by pressing the request switch on a front door while the advanced key is being carried. TYPE B When the ignition switch the ON position or the driver's door is closed, press and hold the desired programming button 1, 2, or 3. NOTE In the following cases, the seat position set function cancels: l Any of the seat adjustment switches are operated. l The set button is pressed. l The vehicle starts moving. Setting the driver's seat to a preprogrammed position There are two methods for setting the driver's seat to a pre-programmed position. For example, the type A method can be used before sitting in the seat and while the driver's door is open, and the type B method can be used after getting in the vehicle with the driver's door closed. TYPE A When the ignition switch in the LOCK position and the driver's door is open, press the programming button 1, 2, or 3 for the desired seating position. Operation using the advanced key/ retractable type key With advanced key Lock button Unlock button 2-7 Form No.8AS7-EA-09E