1996 Mercury Villager Owner Guide 1st Printing - Page 131
1996 Mercury Villager Manual
Page 131 highlights
Resetting the Speed Control To reset at a higher speed, use one of the following methods: s Press the accelerator pedal. When the speedometer indicates the desired speed, push and release the COAST/SET button. s Push and hold the RESUME/ACCEL button. When the vehicle attains the speed you desire, release the switch. s Push, then quickly release the RESUME/ACCEL button. Each time you do this, the set speed will increase by about 1 mph (1.6 km/h). To reset at a lower speed, use one of the following methods: s Lightly tap the brake pedal. When the speedometer indicates the desired speed, push the COAST/SET button and release it. s Push and hold the COAST/SET button. Release the button when the vehicle slows down to the desired speed. s Push, then quickly release, the COAST/SET button. Each time you do this, the set speed will decrease by about 1 mph (1.6 km/h). Resuming a Set Speed To resume the preset speed, push and release the RESUME/ACCEL button. The vehicle will resume the last set speed as long as the vehicle is traveling at a speed over 30 mph (48 km/h). 132