1996 Mercury Villager Owner Guide 1st Printing - Page 307

Servicing Your Villager Changing the Engine Oil and the Oil Filter Refer to the Maintenance Schedule and Record booklet for recommended intervals. Follow these directions to change the engine oil and oil filter: 1. Turn the engine off after it has warmed up. 2. Protect yourself from engine heat and the engine oil being drained. 3. Remove the oil pan drain plug(s) and oil filter. 4. Drain the oil into a container until flow from the drain plug hole(s) and the filter mounting area slows to a drip. 5. Install the drain plug(s) and a new engine oil filter according to directions on the package. NOTE: See Refill Capacities, Motorcraft Parts and Lubrication Specifications in this chapter for the appropriate oil filter and engine oil refill quantity. 6. Remove the engine oil dipstick (highlighted in yellow) to prevent oil contamination of the engine ventilating system while refilling. 7. Refill the engine with a CERTIFIED engine oil of the preferred viscosity. Start the engine and check for leaks. Follow directions in Checking and adding engine oil to be sure the engine is filled to the proper level. WARNING Continuous contact with USED motor oil has caused cancer in laboratory mice. Protect your skin by washing with soap and water. 313