1996 Mercury Villager Owner Guide 1st Printing - Page 359
1996 Mercury Villager Manual
Page 359 highlights
Servicing Your Villager 1. Start the engine. Drive or idle (in neutral) the vehicle for 4 minutes. 2. Idle the vehicle in drive for 40 seconds. 3. Accelerate the vehicle to 45 mph (70 km/h) at 1/4 to 1/2 throttle for 10 seconds. 4. Drive the vehicle with a steady throttle at 45 mph (70 km/h) for 30 seconds. 5. Idle the vehicle in drive for 40 seconds. 6. Continue to drive the vehicle in city traffic at speeds between 25 and 40 mph (40-60 km/h) for 15 minutes. During the 15 minute drive cycle the following modes must be achieved: a. at least 5 stop and idle modes at 10 seconds each b. acceleration from idles at 1/4 to 1/2 throttle position, and c. choose 3 different speeds to do 1.5 minute steady state throttle drives. 7. Accelerate the vehicle up to between 45 and 60 mph (70-100 km/h). This should take approximately 5 minutes. 8. Drive vehicle and hold the throttle steady at the selected speed between 45 and 60 mph (70-100 km/h) for approximately 5 minutes. 9. Drive the vehicle for 5 minutes at varying speeds between 45 and 60 mph (70-100 km/h). 10. Bring the vehicle back to idle. Idle in Drive for 40 seconds. 11. OBD II drive cycle has been completed. Vehicle can be turned off when convenient. 365