1996 Mercury Villager Owner Guide 1st Printing - Page 146

2. Insert and remove key from ignition six times within ten (10) seconds. The instrument panel lights will flash twice. 3. Turn ignition key to the ACC position. 4. Press the LOCK button on the remote transmitter once. 5. To enter additional remote controllers (including the original), unlock, then lock the driver's door using the power door lock switch. 6. Press the LOCK button on a new remote transmitter. The instrument panel lights will flash twice, indicating code is entered. 7. Repeat steps 5 and 6 as needed (up to four remote transmitters may be programmed). Anti-Theft System (If equipped) This system helps protect your vehicle against break-ins or theft by monitoring all doors and the liftgate lock cylinder. When an unauthorized entry occurs, the system triggers and will: s flash the headlamps and hazard lamps s honk the horn s disable the starting circuit to prevent the vehicle from being started To arm the system 1. Remove the key from the ignition. 2. Lock the doors by using either the power door lock switch or by turning the key in either the driver or passenger door lock cylinder. The parking lights will flash and the horn chirps to let you know that the system has been armed. The anti-theft indicator light on the right side of the steering wheel will light and remain on. 148