2002 Mercury Villager Owner's Manual - Page 170
2002 Mercury Villager Manual
Page 170 highlights
Driving Trailer Tow Prep Package (if equipped) The trailer tow prep package on your vehicle (if equipped) includes: • Heavy duty battery • Conventional size spare tire • Trailer tow module and jumper harness Using the jumper harness (if equipped) • Remove the connector cap from the vehicle harness located behind the rear bumper. Store the connector cap in the glove box for reinstallation. • Connect the tow harness to the vehicle harness located behind the rear bumper. • Connect the tow harness connector (SAE J1239) to your trailer. • Confirm the proper vehicle and trailer stop/turn lamp operation. Preparing to tow Use the proper equipment for towing a trailer, and make sure it is properly attached to your vehicle. See your dealer or a reliable trailer dealer if you require assistance. Hitches For towing trailers up to 907 kg (2 000 lb), use a weight carrying hitch and ball which uniformly distributes the trailer tongue load through the underbody structure. For towing trailers up to 1 588 kg (3 500 lb) use a frame-mounted weight distributing hitch which transfers a portion of the trailer tongue load to the front axle system. Do not install a single or multi-clamp type bumper hitch, or a hitch which attaches to the axle. Follow the towing instructions of a reputable rental agency. Whenever a trailer hitch and hardware are removed, make sure all mounting holes in the underbody are properly sealed to prevent noxious gases or water from entering. Safety chains Always connect the trailer's safety chains to the frame or hook retainers of the vehicle hitch. To connect the trailer's safety chains, cross the chains under the trailer tongue and allow slack for turning corners. If you use a rental trailer, follow the instructions that the rental agency gives to you. 170