2002 Mercury Villager Owner's Manual - Page 213
2002 Mercury Villager Manual
Page 213 highlights
Maintenance and Specifications 2. Turn the engine off and wait a few minutes for the oil to drain into the oil pan. 3. Set the parking brake and ensure the gearshift is securely latched in P. 4. Open the hood. Protect yourself from engine heat. 5. Locate and carefully remove the engine oil indicator (dipstick). L H 6. Wipe the indicator clean. Insert the indicator fully, then remove it again. • If the oil level is between the L and H marks, the oil level is acceptable. DO NOT ADD OIL. • If the oil level is below the L mark, add enough oil to raise the level within the L and H range. • Oil levels above the H mark may cause engine damage. Some oil must be removed from the engine by a service technician. 7. Put the indicator back in and ensure it is fully seated. 213