2007 Mercury Milan Owner Guide 1st Printing - Page 45
2007 Mercury Milan Manual
Page 45 highlights
Climate Controls Automatic Temperature Control (ATC) system operating tips • To reduce fog build up on the windshield during humid weather, place the air flow selector in the position. • To reduce humidity build up inside the vehicle, do not drive with the system OFF, or with recirculated air engaged and A/C off. • Do not put objects under the front seats that will interfere with the airflow to the back seats. • Remove any snow, ice or leaves from the air intake area at the base of the windshield. • To improve the A/C cool down, drive with the windows slightly open for 2-3 minutes after start up or until the vehicle has been "aired out." • For maximum cooling performance (MAX A/C): Automatic operation: • Press AUTO for full automatic operation. • Do not override A/C or (recirculated air). • Set the temperature to 60° F (16° C). Override operation: • Select air distribution. (recirculated air). Use (recirculated air) • Select A/C and with A/C to provide colder airflow. • Set the temperature to 60° F (16° C). • Set highest fan speed initially, then adjust to maintain comfort. In MAX A/C setting: • Move the temperature control to full cold. • Set highest fan speed initially, then adjust to maintain comfort. In (panel) or (panel/floor) modes: • Move temperature control to full cold. (recirculated air). Use recirculated air with A/C • Select A/C and to provide colder airflow. • Set highest fan speed initially, then adjust to maintain comfort. • To aid in side window defogging/demisting in cold weather: 1. Select . 45 2007 Milan (mln) Owners Guide (post-2002-fmt) USA (fus)