2008 Nissan Rogue Owner's Manual - Page 190
2008 Nissan Rogue Manual
Page 190 highlights
CONTINUOUSLY VARIABLE TRANSMISSION (CVT) The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the selector lever is moved to the P (Park) position. . When turning the ignition switch to the LOCK position, make sure that the selector lever is in the P (Park) position. When removing the key from the ignition switch (if it is inserted), make sure that the selector lever is in the P (Park) position. 1 The OFF position * is between the LOCK and ACC positions, although it is not marked on the ignition switch. For the Intelligent Key equipped model: PUSH OFF The steering lock can only be locked at this position. PUSH ON The ignition switch will be unlocked while carrying the Intelligent Key. STEERING LOCK To lock steering wheel 1. Turn the ignition switch to the LOCK position. 2. Remove the key, if it is inserted in the ignition switch. 3. Turn the steering wheel 1/6 of a turn clockwise from the straight up position. OFF (1) The engine is turned off with the steering wheel unlocked. . ACC (2) The electrical accessory power activates without the engine turned on. When the ignition switch cannot be turned to the LOCK position: 1. Move the selector lever to the P (Park) position. 2. Turn the ignition switch slightly in the ON direction. 3. Turn the ignition switch to the LOCK position. 4. Remove the key, if it is inserted in the ignition switch. If the ignition switch is turned to the LOCK position, the selector lever cannot be moved from the P (Park) position. The selector lever can be moved if the ignition switch is in the ON position with the foot brake pedal depressed. To unlock steering wheel 1. Insert the key into the ignition switch, if necessary. 2. Gently turn the ignition switch while rotating the steering wheel slightly right and left. ON (3) The ignition system and the electrical accessory power activate without the engine turned on. KEY POSITIONS LOCK (0) Except for the Intelligent Key equipped model: The key can only be removed from the ignition switch at this position. The steering lock can only be locked at this position. START (4) The engine starter activates and the engine will start. The ignition switch, when released, will automatically turn to the ON position. CAUTION As soon as the engine has started, release the ignition switch immediately. 5-10 Starting and driving