2008 Nissan Rogue Owner's Manual - Page 248
2008 Nissan Rogue Manual
Page 248 highlights
SDI2048 REPLACING Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. A 2. Push and hold the release tab * , and move the wiper blade down the wiper arm 1 *. CAUTION . After wiper blade replacement, return the wiper arm to its original position; otherwise it may be damaged when the hood is opened. Make sure the wiper blades contact the glass; otherwise the arm may be damaged from wind pressure. SDI1865 3. Insert the new wiper blade onto the wiper arm until a click sounds. 4. Rotate the wiper blade so that the dimple is in the groove. . If you wax the surface of the hood, be careful not A to let wax get into the washer nozzle * . This may cause clogging or improper windshield washer operation. If wax gets into the nozzle, B remove it with a needle or small pin * . Maintenance and do-it-yourself 8-17