2008 Nissan Rogue Owner's Manual - Page 265

5. Two-digit number (16): This number is 5. Three-digit code: Date of Manufacture 6. Four numbers represent the week and the wheel or rim diameter in inches. 6. Two- or three-digit number (94): This number is the tire's load index. It is a measurement of how much weight each tire can support. You may not find this information on all tires because it is not required by law. 7. H: Tire speed rating. You should not year the tire was built. For example, the numbers 3103 means the 31st week of 2003. If these numbers are missing, then look on the other sidewall of the tire. 3 * Tire ply composition and material drive the vehicle faster than the tire speed rating. SDI1607 2 * TIN (Tire Identification Number) for a Example new tire (example: DOT XX XX XXX XXXX) 1. DOT: Abbreviation for the "Department of Transportation". The symbol can be placed above, below or to the left or right of the Tire Identification Number. cation mark 3. Two-digit code: Tire size 2. Two-digit code: Manufacturer's identifi- 4. Three-digit code: Tire type code (Op- tional) 8-34 Maintenance and do-it-yourself The number of layers or plies of rubber-coated fabric in the tire. Tire manufacturers also must indicate the materials in the tire, which include steel, nylon, polyester, and others. 4 * Maximum permissible inflation pressure This number is the greatest amount of air pressure that should be put in the tire. Do not exceed the maximum permissible inflation pressure. 5 Maximum load rating * This number indicates the maximum load in kilograms and pounds that can be carried by the tire. When replacing the tires on the vehicle, always use a tire that has the same load rating as the factory installed