2008 Nissan Rogue Owner's Manual - Page 199
2008 Nissan Rogue Manual
Page 199 highlights
switch and release it. (The SET indicator light in the instrument panel will illuminate.) Take your foot off the accelerator pedal. Your vehicle will maintain the set speed. . To pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle will return to the previously set speed. The vehicle may not maintain the set speed on winding or hilly roads. If this happens, drive without the cruise control. km/h) below the set speed. . If you move the selector lever to the N (Neutral) position, the cruise control will be canceled. To reset at a faster cruising speed, use one of the following methods: . Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the SET/COAST switch. Push and hold the RESUME/ACCELERATE switch. When the vehicle attains the desired speed, release the switch. Push, then quickly release the RESUME/ ACCELERATE switch. Each time you do this, the set speed will increase by about 1 MPH (1.6 km/h). . . SSD0668 To cancel the preset speed, use one of the following methods: a) Push the CANCEL switch. The SET indicator light will turn off. b) Tap the brake pedal. The SET indicator light will turn off. c) Turn the MAIN switch off. Both the CRUISE and SET indicator lights will turn off. . If you depress the brake pedal while pushing the RESUME/ACCELERATE or SET/ COAST switch and reset at the cruising speed, the cruise control will disengage. Turn the MAIN switch off once and then turn it on again. The cruise control will automatically cancel if the vehicle slows more than 8 MPH (12 . 1. 2. 3. 4. RESUME/ACCELERATE switch SET/COAST switch CANCEL switch MAIN (ON·OFF) switch CRUISE CONTROL OPERATIONS The cruise control allows driving at a speed between 25 to 89 MPH (40 to 144 km/h) without keeping your foot on the accelerator pedal. To turn on the cruise control, push the MAIN switch on. The CRUISE indicator light will illuminate. To set cruising speed, accelerate the vehicle to the desired speed, push the SET/COAST To reset at a slower cruising speed, use one of the following methods: . Lightly tap the brake pedal. When the vehicle attains the desired speed, push the SET/COAST switch and release it. Push and hold the SET/COAST switch. Release the switch when the vehicle slows down to the desired speed. Push, then quickly release the SET/COAST switch. Each time you do this, the set speed will decrease by about 1 MPH (1.6 km/h). Starting and driving 5-19 . . .